Home » Publications » Conferences

Conferences

Our participation (reports, presentations) in international conferences:

 

Meetings of the European DIERS Users Group (EDUG)

  1. J. Singh (HEL), A. Kossoy (CISP), Understanding Fast Gas Generating, High Energy Decomposition Reactions, Annual meeting 22-23 June 2017 , Lyon, France
  1. A. Kossoy,  Adiabatic calorimetry – new trends and some peculiarities of application, Annual meeting 22-23 June 2017 , Lyon, France
  2. A. Kossoy (CISP), K. Middle (Chilworth), J. Singh (HEL), 2 unusual complex cases – how to deal with adiabatic data when traditional methods fail, Annual meeting 22-23 June 2017 , Lyon, France

  3. A. Kossoy, J. Singh, Mathematical Methods for Application of Experimental Adiabatic data – an
    update and extension, Annual meeting 30 June-1 July 2014 , Buxton, UK
  4. A. Kossoy, A. Benin, A. Suvorov, Yu. Akhmetshin, Study of decomposition kinetics of high concentration hydrogen peroxide, Joint DIERS-EDUG meeting 14-16 June 2011, Hamburg, Germany, 

  5. N. Podlevskikh, Specific features of simulating the blowdown in high pressure vessel at sub- and supercritical temperatures, Annual meeting 4-6 June 2008, St. Petersburg, Russia 

  6. N. Podlevskikh, Transient Model of flow through vent lines and valves. Application to tube rupture in a heat exchanger, Annual meeting 4-6 June 2008, St. Petersburg, Russia 

  7. N. Podlevskikh, Some aspects of algorithms for predicting the flow rate through safety valves, Annual meeting 4-6 June 2008, St. Petersburg, Russia 

  8. A. Kossoy, I. Sheinman, New results of analysis of thermal-physical processes in an adiabatic calorimeter, Annual  meeting 6-7 September 2007, Frankfurt, Germany

  9. A. Kossoy, A. Benin, Further development of the CISP Thermal Safety Software: New features. Annual meeting 7-8 April 2003, Sent Etienne, France

  10. N. Podlevskikh, A. Sokolov, “VENT – new software for two-phase flow simulation through the complex multi segment vent line” Annual meeting 26-27 April 2001, Ispra, Italy

  11. A. Kossoy, Yu. Akhmetshin. “New software for design of inherently safer processes” Proceedings of the annual meeting of Annual meeting 26-27 April 2001, Ispra, Italy

  12. N. Podlevskikh, A. Kossoy, A. Sokolov, “Validation of the BST-software for ERS-design”. Proceedings of the annual meeting of Annual meeting 18-19 May 2000, Ludwigshafen, Germany,

  13. A. Kossoy, V. Belohvostov, A. Akhmetshin. Specific features of kinetics evaluation in hazard assessment. Minutes of the annual meeting of Ammual meeting June 22-23, 1999, St. Petersburg, Russia

  14. N. Podlevskikh Runaway Simulation and Vent Sizing for Batch Stirred Tank. Methodology and Software. Minutes of the annual meeting of Ammual meeting June 22-23, 1999, St. Petersburg, Russia

 

Meetings of the Design Institute of Emergency Relief Systems of AIChE (DIERS)

  1. N. Podlevskikch, A. Sokolov and A. Kossoy, “Comparative analysis of SuperChems and BST software”.  Fall DIERS Users Group meeting, Boston, USA, 14-18 October 2000

  2. A. Kossoy, A. Benin. Developments in the Field of Methodology and Software for Thermal Hazards Assessment. 21st Meeting of DIERS Users Group of the AIChE, Pittsburdh, Pennsilvania, USA, October 27-29, 1997.

Meetings of the Working group of Energetic and Oxidizing Substances (EOS) of the International Group of experts on Unstable Substances (IGUS)

  1. A. Kossoy, SADT determination based on the AIBN benchmark –some lessons drawn from the BAM project, Annual meeting  May 2015, Ottawa, Canada,

  2. A. Kossoy, J. Rabe, O. Kochetov, An advanced method for DEWAR calibration (TDG H4 test & adiabatic), Annual meeting 17-18 April 2013, Creil, France
  3. A. Kossoy, J. Rabe, Simulation-based determination  of SADT using the kinetic model evaluated from data of H4 test, Annual meeting 7-9 May 2012, Berlin, Germany
  4. A. Kossoy, Some results of applying new type of the Trough test for determining ability to SSD, Annual IGUS-EOS meeting, Berlin, Germany, 7-9 May 2012
     
  5. A. Kossoy, On combined use of DSC and Trough test for determining ability of a fertilizer to SSD, Annual  meeting 10-12 June 2009, St. Petersburg, Russia,
  6. A. Kossoy, Applying simulation-based approach for evaluating hazard’s characteristics of chemicals, Annual meeting 14-5 May 2008, Stockholm, Sweden,

Mary Kay O'Connor Process Safety Center Symposiums “Beyond Regulatory Compliance, Making Safety Second Nature”

  1. A. Kossoy, I. Sheinman, Review of the methods for SADT determination, College Station, TX, USA, 25-26 October 2005

  2. A. Kossoy, A. Benin, Yu. Akhmetshin. The Advanced Approach to Reactivity Rating. College Station, TX, USA, 28-29 October 2003

  3. A. Kossoy, A. Benin, Yu. Akhmetshin. “From experimental Data Via Kinetic Model To Predicting Reactivity And Assessing Reaction Hazards (Methodology and Software). College Station, Texas, USA, 30-31 October 2001

 Other Conferences

  1. A. Kossoy, Effect of peculiarities of DSC experiment on the correctness of the kinetics created. 11 Int. Heat Flow Calorimetry Symposium on Energetic Materials, Fraunhofer ICT, Pfinzal-Berghausen, Germany, May 13-16 2019
     
  2. A. Kossoy, Applying adiabatic calorimetry for study of energetic materials - is it possible? 11 Int. Heat Flow Calorimetry Symposium on Energetic Materials, Fraunhofer ICT, Pfinzal-Berghausen, Germany, May 13-16 2019
     
  3. A. Kossoy, P. Grinberg, O. Antonov, Kinetics-based simulation of thermal explosion – some  examples of  experimental validation, 11 Int. Heat Flow Calorimetry Symposium on Energetic Materials, Fraunhofer ICT, Pfinzal-Berghausen, Germany, May 13-16 2019
     
  4. J. Singh (HEL), A. Kossoy (CISP), Defining the “unwanted” runaway reaction  hazard  using experimental data and computer modelling, Hazardous Chemistry for Streamlined Large Scale Synthesis’, Antwerp, Belgium, 28- 29 November 2017
     
  5. A. Kossoy, "The system for investigation of reactive hazards of chemical products and processes based on combined use of methods of thermal analysis and calorimetry and mathematical simulation", Pplenary lecture, XV International Conference on Thermal Analysis and Calorimetry (RTAC-2016), Saint-Petersburg, Russia, 19 – 23 September, 2016
  6.  V. Belokhvostov, A. Kossoy, A. Suvorov, A. Dalin, "Study of curing kinetics of curing of single-component epoxy resin with high physical-chemical  parameters", XV International Conference on Thermal Analysis and Calorimetry (RTAC-2016), Saint-Petersburg, Russia, 19 – 23 September, 2016
  1. A. Kossoy, V. Belokhvostov, A. Suvorov, "Methodical aspects of applying DSC experiment for the study of reaction kinetics". XV International Conference on Thermal Analysis and Calorimetry (RTAC-2016), Saint-Petersburg, Russia, 19 – 23 September, 2016
  1. A. Kossoy. Course of lectures "The simulation-based methods for analysis and evaluation of thermal safety of chemical process" given to the students and post-graduates of Chemical engineering department of Nanjing University of Science and Technology, Nanjing, China, 15 May - 28 June 2016  
  1. A. Kossoy.  Simulation-based approach to reactive hazards assessment. 2 days seminar, Beijing, China, 24-25 November 2014
     
  2. A. Kossoy. Effect of peculiarities of a DSC experiment on correctness of the kinetic model created,  XIV International Conference on Thermal Analysis and Calorimetry (RTAC-2013), Saint-Petersburg, Russia, 23 – 28 September, 2013 
     
  3. V. Belochvostov, A. Kossoy, Features of study of decomposition kinetics by DSC on the example of decomposition of water solution of hydroxylamine, XIV International Conference on Thermal Analysis and Calorimetry (RTAC-2013), Saint-Petersburg, Russia, 23 – 28 September, 2013  
     
  4. A. Kossoy The advanced methods for assessment of reaction hazards of chemicals/chemical processes and design of inherently safer processes. 6-hours lecture course at the Seminar of the Formosa group, Yunlin, Taiwan, 2-4 July 2012 
     
  5. A. Kossoy, A. Benin, I. Sheinman, Simulation-based procedure for assessment of thermal hazard of energetic materials, 7th International Heat Flow Calorimetry Symposium on Energetic Materials- HFCS-EM, Rijswijk, The Netherlands, 17-19 May 2010
  6. A. Kossoy Yu. Akhmetshin, Specific Features of Kinetics Evaluation in Reaction Hazard Assessment, 7th International Heat Flow Calorimetry Symposium on Energetic Materials- HFCS-EM, Rijswijk, The Netherlands, 17-19 May 2010

  7. A. Kossoy, A. Benin, Yu. Akhmetshin, Simulation-based approach to design of inherently safer processes, 12th Int. Loss Prevention Symposium., Edinburgh, UK, 22-24 May 2007

  8. I. Ilin, N. Podlevskikh , A. Kossoy and A. Murashov, Simulation of Two-Phase Transient Flow Following Tube Rupture in Heat Exchangers for Relief Device Sizing, World Conference on Safety of Oil and Gas Industry, Gyeongju, Korea, April 10-13, 2007

  9. A. Kossoy, Yu. Akhmetshin, Specific features of kinetics evaluation in reaction hazard assessment  3rd Int. Symposium on Runaway Reactions and Pressure Relief Design, Cincinnati, USA, 30 October – 4 November, 2005

  10. A. Kossoy, I. Sheinman, Kinetics-based simulation – the general approach to assessing thermal explosion hazard, 36th International Annual Conference of ICT “Energetic Materials - Performance and Safety”, Karlsruhe, Germany, 28 June – 1 July 2005

  11. A. Kossoy, I. Sheinman, Applying kinetics-based approach for simulation of thermal explosions, 3rd NRIFD Symposium, Tokyo, Japan, 10-12 March 2004, pp 323-333

  12. A. Kossoy, V. Belokhvostov; From calorimetric data via kinetics-based simulation to predicting reactivity and assessing reaction hazards (Methodology and Software). 30th annual conference of North American Thermal Society (NATAS), Pittsburgh, PA, USA, 23-25 September 2002

  13. A. A. Kossoy, I. Ya. Sheinman, N. A. Podlevskikh, Applying kinetics-based approach for simulation of thermal explosions and vent sizing. 30th annual conference of North American Thermal Society (NATAS), Pittsburgh, PA, USA, 23-25 September 2002

  14. A. Kossoy, N. Podlevskikh, I. Sheinman. From calorimetric data via kinetic modeling to runaway simulation and reactor optimization (methodology and software). International Conference "Assessment and Control of Chemical Processing Hazards", London, England, 24-25 October, 2000

  15. A. Kossoy, A. Benin, P, Smykalov. Methodology and Software for Chemical Engineering and Reaction Hazard Assessment. 3rd Japanese Mettler RC User Forum, Kioto, Japan, November 4-6, 1998

  16. A. Kossoy, P. Misharev, V. Belochvostov, Peculiarities of Calorimetric Data Processing for Kinetics Evaluation in Reaction Hazard Assessment. 53rd Annual Calorimetry Conference, Midland, Michigan, USA, August 9-14, 1998


 

 

© 2011
CISP Ltd., (ООО "Химинформ"), Saint-Petersburg, Russian Federation  


 

Conferences